Bearskin Cap Heads: Fitting & Painting Tips

Quick answer

Fit Bearskin Cap Heads by trimming the neck peg to match your torso, then paint with thin layers and a steady hand for sharp details.

Step-by-step fitting and painting guide

1. 1. Clean and dry-fit the head: Remove any support material from the 3D print. Gently press the head onto the torso neck without glue. If it wobbles or sits too high, the peg needs trimming. Common mistake: forcing a tight fit can crack the neck; always trim gradually.
2. 2. Trim the neck peg: Use a hobby knife or small file to shave the peg in small increments. Re-test the fit after each pass until the head sits flush and looks natural from all angles. Checkpoint: the head should rotate slightly but stay stable without glue.
3. 3. Glue and prime: Apply a thin layer of plastic cement or super glue to the peg, press the head into place, and hold for 10 seconds. Once dry, apply a light primer coat to unify the surface. Common mistake: using too much glue can seep out and ruin the paint finish.
4. 4. Basecoat the bearskin cap: Paint the cap in a dark brown or black, using thin coats to preserve the 3D-printed fur texture. Let each coat dry completely before adding highlights. Checkpoint: if the cap looks glossy, you are applying paint too thickly.
5. 5. Paint the face and details: Use a fine brush for eyes and skin tones. Paint the face in a natural flesh tone, then add eyes as two small dots. Highlight the cap's edges with a lighter drybrush. Common mistake: painting eyes too large makes the face look cartoonish; keep them tiny.
6. 6. Seal and varnish: Apply a matte varnish to protect the paint from handling. Avoid gloss varnish on the cap unless you want a shiny leather look. Checkpoint: test the varnish on a spare head first to confirm the finish.

Product facts

• Bearskin Cap Heads (Male): This set includes 10 Bearskin Cap Heads designed to fit male Grimdark Empire torsos. Each head is a high-quality 3D print, and this is a physical product. You get a consistent batch of ten heads, so you can practice on one before committing to the rest.