Start with the Snap Tray, not the glue
The Tannenburg 10 Woman Firing Line is a physical 3D printed modular kit from the Grimdark Empire Kickstarter. Its components arrive on a high density Snap Tray, which is designed to make identification and removal simple as you construct each figure. Treat that tray as your build map: identify the parts for one figure before you break anything free.
Because the kit is fully modular and push-together, you can test assemble each model before committing to glue. That is the single most useful feature for a firing line squad, where repeated poses and shared components can make it easy to lose track of which arm or head belongs where.
What the kit gives you to work with
- Tannenburg 10 Woman Firing Line: Fully modular, 'push-together' Grimdark troops presented on a high density Snap Tray. You can dry-fit each figure and check component orientation before any permanent bond.

Tannenburg 10 Woman Firing Line - Tannenburg 10 Woman Firing Line: Components feature minimal cleanup and brush-away supports. Cleanup is part of the build, but the kit is designed so you are not carving heavy support structures off every piece.
- Tannenburg 10 Woman Firing Line: Each model can be test assembled with the push-together feature and permanently assembled with super glue. This is the core assembly sequence: dry-fit, check, then glue only what you are happy with.
- Tannenburg 10 Woman Firing Line: Includes full sets of dress cap and pith helmet heads. Head choice is a real decision for the squad, and you can make it during test assembly rather than after gluing.
A build order that keeps a ten-woman squad consistent
Work one figure at a time from the Snap Tray. The goal is to avoid mixing components across the squad before you have checked the fit.
- 1. Identify one figure's components on the tray: Use the high density Snap Tray layout to group the parts for a single model. Do not remove parts for the whole squad at once.
- 2. Remove and brush away supports: The kit is described as having minimal cleanup and brush-away supports. Clear the support material from the pieces you are about to test-fit.
- 3. Push together for a dry fit: Use the push-together feature to test assemble the model. Check that the torso, arms, and head sit as intended before any glue.
- 4. Choose the head while the model is still dry: The kit includes full sets of dress cap and pith helmet heads. Decide which head suits each figure before permanent assembly.
- 5. Glue only after the dry fit is confirmed: Super glue is the supplied method for permanent assembly. Apply it to the joints you have already checked, not to components you are still deciding between.
- 6. Repeat for each figure in the firing line: Keep the same dry-fit-then-glue rhythm across the squad so poses and head choices stay deliberate rather than accidental.
Why push-together matters for a firing line
A firing line squad depends on repeatable, readable poses. The push-together design lets you stand each figure up and look at the silhouette before glue locks it in. If an arm or head angle looks wrong in the line, you can change it while the model is still dry.
The modular nature also means you are not committed to one build until you choose to be. That is useful when you want the squad to look like a unit without every figure being identical.
Basing decisions the supplied information supports
The supplied product record does not include base sizes, base types, or basing instructions. That means you should not treat any base dimension as confirmed by this kit listing. What the record does confirm is that the models are physical 3D printed components intended for assembly, so basing is a step you plan around your own collection and game system rather than a supplied instruction.
A practical approach is to finish the dry fit first, then check the model's footprint against the bases you already use. Because the kit is modular and push-together, you can test how a figure sits before gluing it to a base. If you are building the whole firing line, decide on a consistent basing approach before you start permanent assembly so the squad looks coherent.
Painting prep that follows from the kit facts
The record does not supply a painting guide, primer recommendation, or paint range. These are preparation steps you can take from the kit's confirmed features.
- Clean before you prime: The kit is described as having minimal cleanup and brush-away supports. Do that cleanup before any primer goes on.
- Test fit before you paint: Push-together assembly lets you check joints and head choices before paint. Painting first can make a dry fit harder to judge.
- Decide heads before permanent assembly: With dress cap and pith helmet heads included, choose per figure while the model is still dry. That avoids painting a head you will not use.
- Keep sub-assemblies manageable: If you paint in parts, use the push-together fit to confirm how those parts meet before you commit to a final glue-up.
What to check before the squad is permanent
Before you glue the last figure, line up the whole squad. Check that the head choices read as a unit, that the firing line poses are consistent enough to look intentional, and that each model sits the way you want on its base. The push-together feature is your last chance to adjust without cutting or repair.
The supplied record does not confirm a specific glue brand, cure time, or handling strength. Use super glue as the stated permanent assembly method and follow the adhesive's own instructions for safe use.


