Start with the five resin sidearms in front of you
The Laser Pistols x5 set gives you five identical resin sidearms scaled for 28mm heroic miniatures. That consistency is the point: you can equip a squad leader, an officer, and a few special weapon troopers with the same recognizable laser pistol profile without hunting through a bits box for matching parts.
Because the pistols are cast in resin, the assembly and painting sequence below focuses on what that material asks of you: inspect each piece, clean up cast edges, test-fit before glue, and build your paint layers in thin passes. The supplied product information does not include a step-by-step manufacturer instruction sheet, so treat this as a practical workshop order rather than a replacement for the casting instructions that came with your kit.
What the set actually provides
- Laser Pistols x5: This set contains five Laser Pistols, designed for 28mm heroic scale miniatures. Five matching pistols let you arm a small command group or special-weapon troopers with a consistent look.

Laser Pistols x5 - Laser Pistols x5: Cast in high-quality resin by Victoria Miniatures, these sidearms offer a consistent look for your sci-fi or wargaming forces. Resin rewards careful cleanup and thin paint layers, and the consistent casting keeps your squad visually unified.
- Laser Pistols x5: Made from durable resin for easy assembly and painting. The material is intended to take glue and paint readily, but you still need to remove mold lines and test-fit joints before committing.
A practical assembly sequence for resin laser pistols
Work through these steps for all five pistols at once so you catch problems early and keep the set consistent.
- Inspect each pistol under good light: Lay out all five and check for visible mold lines, thin areas, or flash. The supplied information does not list specific defect types to expect, so judge each piece by eye and set aside any that need extra attention.
- Clean up cast edges before glue: Use a sharp hobby knife or fine file to scrape mold lines away from the pistol body and grip. Work slowly and support the part from behind so you do not snap a thin barrel or muzzle.
- Test-fit the pistol to the hand or mount: The set is designed for 28mm heroic scale figures, but the supplied information does not confirm a universal grip or peg size. Dry-fit each pistol against the hand, holster, or mount you plan to use and adjust the contact point before adding glue.
- Glue in sub-assemblies where possible: If your miniature’s arm or hand can be painted separately, attach the pistol to that sub-assembly first. Painting a pistol already fixed to a finished figure is harder around the grip and trigger area.
- Check alignment across all five: Once glued, compare the five pistols side by side. Consistent angle and height matter more than perfect symmetry, especially when the weapons will be seen at tabletop distance.
Painting small miniature weapons without losing the details
A 28mm pistol is a small canvas, so the goal is readable contrast rather than layered realism. Prime the pistol in a light or mid-tone that suits your army, then block in the main body color. Keep the first coat thin enough that it does not fill the trigger guard or obscure the muzzle shape.
Work from the largest areas to the smallest: body, grip, then any metal or energy details. A dark wash in the recesses followed by a careful highlight on the upper edges will separate the pistol from the hand holding it. If you are painting several pistols for the same squad, mix enough of each color to finish all five in one session so the set stays matched.
The supplied information does not specify a particular paint range, primer, or wash, so choose products you already trust on resin miniatures. Test any new primer on a spare piece of resin before committing a whole pistol.
Where these pistols fit in a conversion or bits box
The Laser Pistols x5 set is most useful when you need matching sidearms rather than a single character piece. Consider these practical uses before you start cutting or gluing.
- Squad leaders and officers: A pistol with a clean, consistent profile reads well at the front of a unit. Five identical pistols let you mark out command figures without mixing weapon styles.
- Special weapon troopers: If your force uses laser pistols as a signature sidearm, the set gives you enough to arm several specialists with the same look.
- Holstered or displayed weapons: A spare pistol can be glued to a belt, vehicle hull, or base as a piece of gear. Check the contact area first; the supplied information does not confirm a molded holster or mounting peg.
- Kitbashing across factions: The pistols are designed for 28mm heroic scale, so they will suit many sci-fi ranges. Test the grip against your chosen hand before assuming a perfect fit.
What the supplied information does not confirm
The product record lists a Standard variant only and does not include separate left- and right-hand versions, a specific grip size, or a manufacturer’s cleanup and safety procedure. It also does not confirm whether the pistols are single-piece castings or include separate components. Treat those details as things to check on the physical castings in front of you, not as guaranteed features.
That uncertainty is manageable: dry-fit before glue, clean up conservatively, and paint in thin layers. The five-pistol set is built for consistency, and a careful assembly and painting sequence will keep that consistency from the workbench to the tabletop.


