Terug naar blog
Handleidingen 2026-11-17 Victoria Miniatures by Victoria Lamb 0 weergaven

Tannenburg Capt. Gloria Leadhammer: Assembly and Painting Guide

Tannenburg Capt. Gloria Leadhammer: Assembly and Painting Guide

A practical build and paint plan for the Tannenburg Capt. Gloria Leadhammer resin character kit, from dry-fitting the three head options to choosing a display base.

The head choice comes first

Captain Gloria Leadhammer is a single resin character with a decision built into the kit: three separate heads. The body, left arm, right arm, and a 25mm round base are also included, but the head is the part that changes the model's identity. Decide which head you are building before you clean anything, because the pith helmet, the cap, and the bare head each push the paint plan in a different direction.

This is a physical 3D-printed kit, not a multi-part plastic sprue. That matters for preparation: you are working with separate printed components, so test-fitting each joint before glue is the most useful habit you can bring to the build.

What is in the kit

  • Tannenburg Capt. Gloria Leadhammer: The kit contains a body, left arm, right arm, three heads (pith helmet, cap, and bare), and a 25mm round base. Knowing the exact component list lets you lay out the whole model before cleanup and confirm nothing is missing.
    Tannenburg Capt. Gloria Leadhammer
    Tannenburg Capt. Gloria Leadhammer
  • Tannenburg Capt. Gloria Leadhammer: The kit is supplied as high-quality 3D prints and is a physical product. This tells you to expect printed parts rather than a conventional plastic kit, so your prep should suit resin components.

A dry-fit sequence that avoids rework

The supplied information lists the parts but does not include a manufacturer assembly order, so treat this as a sensible working sequence rather than an official instruction. The goal is to test every joint while the parts are still separate.

  1. Lay out and identify all seven components: Match the body, both arms, the three heads, and the 25mm base against the kit list. Set the two heads you are not using aside in a labelled bag so they do not get lost or mixed up.
  2. Test each head on the body without glue: Try the pith helmet, cap, and bare head in turn. Check how each sits and which one gives you the silhouette you want. This is the cheapest moment to change your mind.
  3. Dry-fit both arms to the body: Check the shoulder joins before any adhesive. If a join needs attention, address it now rather than after the head is fixed.
  4. Commit to a head, then attach the arms: Once the head is chosen, glue the head and arms in place. Keep the model off the base until the upper body is stable.
  5. Attach the finished figure to the 25mm round base: The supplied base is a 25mm round, so plan the pose and footprint around that size before you commit.

Painting an officer uniform that reads at table distance

The kit gives you an officer figure with a choice of headgear, and that choice should drive your paint plan. The pith helmet and the cap both create a strong shape at the top of the model, so decide early whether the headgear is a contrasting colour or blends into the uniform. The bare head removes that shape entirely, which means the face becomes the focal point and needs more careful work.

The supplied information does not include a official colour scheme, so the uniform is your call. A practical approach for a character model is to keep the uniform relatively restrained and put the strongest contrast on the face, the headgear, and any equipment. That way the model reads clearly from across a table without needing elaborate freehand.

Paint the head separately before attaching it if you can. The three-head design makes this easy: you can finish the chosen head on a temporary holder, then glue it to the completed body. That avoids trying to reach the face around a raised arm or a helmet brim.

Display base ideas within the supplied footprint

The kit includes a 25mm round base, which is a compact footprint for a character. The supplied information does not describe a sculpted base, so any decoration you add is your own modelling. Keep the following in mind.

  • Keep the base flat where the feet sit: A 25mm round leaves little room for error. Build any texture around the feet rather than under them so the figure sits level.
  • Use the base edge as a frame: A clean painted rim on the 25mm round base gives a display piece a finished look without adding height or bulk.
  • Reserve height for the head: If you add a rock or step, check that the pith helmet or cap still clears the top of the model's silhouette. A tall addition on a small base can make the figure look unstable.
  • Match the base to the head you chose: A bare-headed build draws the eye to the face, so a simpler base keeps attention there. A helmeted build can carry a slightly busier base without losing focus.

What the supplied information does not confirm

The kit record lists the components and the 25mm round base, but it does not include resin cleanup instructions, a recommended adhesive, a primer, or a paint range. It also does not state a scale or a rules set. Those are real limits on how far this guide can go, and they are worth knowing before you start.

The practical response is to use your usual resin preparation routine and test-fit every joint before gluing. If you are unsure about a step, check the parts in front of you rather than assuming a detail the kit record does not provide. The three heads are the clearest example of a choice the kit genuinely supports; the rest of the build is standard character-model work.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel