Standard Artillery Wheels: Compatibility and Conversion Guide
By Victoria Miniatures by Victoria Lamb | Published: 2026-10-27
Category: Buying Guides
Learn which wargaming and diorama projects accept Standard Artillery Wheels from Victoria Miniatures. Get practical rules for mixing resin wheels with metal or plastic kits.
Quick answer
Victoria Miniatures Standard Artillery Wheels fit most scale artillery and carriage projects that use a single axle. They work best with resin or plastic kits but need minor modification for metal models.
Why compatibility matters for artillery wheels
Not all wargaming artillery kits use the same axle size or wheel diameter. The Standard Artillery Wheels from Victoria Miniatures are hand-cast in resin, which gives crisp detail but means they may not drop into every model without adjustment. Understanding the axle hole, wheel thickness, and material match helps you avoid wasted work.
Material differences: resin vs. metal vs. plastic
Resin wheels are lighter than metal and easier to pin or glue, but they can be brittle if you force them onto a tight metal axle. Plastic kits usually accept resin wheels with standard cyanoacrylate glue. For metal models, you may need to drill out the axle hole slightly or use a two-part epoxy.
Decision rules for using Standard Artillery Wheels
- Check the axle diameter: Measure the axle on your kit. If it is thicker than 3 mm, you will need to drill the resin wheel hub to 3.2 mm or file the axle down. If the axle is thinner, use a brass tube sleeve.
- Match the wheel thickness to the carriage fork: These wheels are approximately 4 mm thick. If your carriage fork gap is narrower, sand the inner face of the wheel. If it is wider, add a plastic or brass spacer washer.
- Decide on permanent or temporary assembly: For display models, glue the wheel directly to the axle with super glue. For wargaming pieces that need to be packed flat, pin the wheel with a 0.5 mm wire so it can be removed later. Pinning adds durability and allows wheel replacement.
Product facts
- Standard Artillery Wheels: Set includes 2 standard artillery wheels (1 pair) for one axle. Hand-cast in high-quality resin for crisp detail. You get a matched pair ready for a single axle, and the resin material means the wheels are light enough for most wargaming bases without extra support.
Standard Artillery Wheels
Who should buy these wheels
Best for
- Wargamers upgrading plastic artillery kits with resin detail parts
- Modelers building carriages or limbers from scratch who need a pair of standard-scale wheels
Not ideal for
- Projects requiring a specific historical wheel pattern not represented by a standard artillery wheel
- Metal kits with very tight axle tolerances unless you are comfortable drilling or filing
