Missile Launcher Rockets x12: Painting and Assembly Guide
By Victoria Miniatures by Victoria Lamb | Published: 2026-10-28
Category: How-to Guides
Learn how to assemble and paint your Missile Launcher Rockets x12 kit. This guide covers preparation, assembly, painting, and basing for resin miniatures.
Quick Answer
Assemble and paint your Missile Launcher Rockets x12 with this straightforward guide, covering resin prep, assembly, painting, and basing for a striking finish.
Why Resin Preparation Matters
Resin miniatures require a bit more prep than plastic or metal. The Missile Launcher Rockets x12 kit is hand cast in high quality resin, so you may need to clean off mold release residue and remove small mold lines before painting.
Skipping this step can cause paint to peel or chip later. A quick wash in warm soapy water and gentle scrubbing with an old toothbrush will ensure your paint adheres properly.
Assembly Considerations
The kit includes 12 rockets, which are perfect for use with the Desert Scorpions Missile Launcher Team. Each rocket is small, so handle them carefully to avoid breaking delicate fins or tips.
Use super glue (cyanoacrylate) for resin-to-resin bonds. It sets quickly and provides a strong hold. If you need to adjust positioning, do so within the first few seconds before the glue fully cures.
Assembly and Painting Steps
- Prepare the resin: Wash the rockets in warm soapy water and gently scrub with an old toothbrush to remove mold release. Rinse and let dry completely. Check that all release agent is gone; otherwise paint may not adhere.
- Remove mold lines: Carefully scrape away any mold lines using a hobby knife or fine sandpaper. Be gentle around the fins and tips to avoid breaking them. A common mistake is cutting too deep; use light strokes.
- Attach rockets to the launcher: Apply a small amount of super glue to the base of each rocket and press it into place on the Desert Scorpions Missile Launcher Team. Hold for a few seconds until set. Ensure the rockets are aligned straight; adjust within the first few seconds.
- Prime the rockets: Spray or brush on a primer suitable for resin. A light, even coat is best; avoid heavy layers that can obscure detail. Check for missed spots; a second thin coat may be needed.
- Paint the rockets: Use a base coat of your chosen color, then add highlights and details. For a realistic look, consider a metallic or dark scheme with a drybrush for contrast. Thin your paints to avoid clogging the fine details.
- Apply a sealant: Once the paint is dry, apply a matte or gloss varnish to protect the finish. This is especially important for resin, which can be more fragile than plastic. Test the varnish on a spare piece first to ensure it doesn't react with your paint.
- Base and finish: If desired, add basing material to the launcher's base. Use a texture paint or small stones, then drybrush to blend with your army's theme. Ensure the base is fully dry before handling to avoid smudging.
Product Facts
- Missile Launcher Rockets x12: This kit includes 12x Missile Launcher Rockets, hand cast in high quality resin and sculpted by Jake Schneider. The resin material allows for fine detail, but requires proper cleaning and careful handling to avoid breakage during assembly.
Missile Launcher Rockets x12
