Halfling Inquisitor Witch Hunter: Painting and Basing Guide

By Victoria Miniatures by Victoria Lamb | Published: 2026-10-29

Category: How-to Guides

Learn to paint and base the Halfling Inquisitor Witch Hunter kit, from assembling the resin prints to adding a base that suits his grim role.

Quick Answer

Start by cleaning and assembling the Halfling Inquisitor Witch Hunter kit, then paint in layers from the inside out, finishing with a base that tells his grim story.

Why This Halfling Stands Out

The Halfling Inquisitor Witch Hunter kit includes Ham Stufinghorn and his sidekick Taters, with a left hand holding a turkey. This gives you a character with a darkly humorous twist—perfect for leading a halfling warband or adding a unique model to your collection.

Because the kit is a physical 3D print, you'll need to handle it carefully. Small details like the turkey and the sidekick can be delicate, so take your time during assembly and painting.

Step-by-Step Painting and Basing

Clean and Assemble: Remove any support marks from the 3D prints with a hobby knife and file. Dry-fit the left hand with turkey to the arm before gluing. Use super glue for resin parts. Check that the hand fits snugly before applying glue.
Prime the Model: Use a primer that matches your base color scheme. For a grim witch hunter, a dark grey or black primer works well. Shake the can thoroughly and spray in short bursts from about 20 cm away. Avoid thick coats—thin layers prevent losing fine details.
Paint the Face and Skin: Paint the halfling's face with a base of Bugman's Glow or similar. Layer a lighter skin tone on raised areas, then add a wash to the eye sockets and cheeks. Paint the eyes carefully, leaving a small white dot and adding a dark pupil. Keep the face paint thin to avoid obscuring the sculpted features.
Paint the Clothing and Gear: Use earthy tones like browns, greys, and muted greens for a witch hunter's attire. Paint the turkey with a brown base and a lighter drybrush on the breast. Add a wash to create shadows in the folds. Test colors on a palette first to ensure they complement each other.
Base the Miniature: Apply texture paint or sand to the 25mm base, then paint it to match your warband's theme. Add static grass, tufts, or small stones for variety. Consider a subtle blood splatter or a burned look to fit the witch hunter vibe. Let the base dry completely before handling to avoid smudges.
Seal and Finish: Spray a matte varnish to protect the paint, then apply a gloss varnish to the eyes and any wet areas if desired. Reattach the base if needed and let it cure fully. Varnish in a well-ventilated area and allow 24 hours to cure.

Kit Contents and Considerations

Halfling Inquisitor Witch Hunter: This kit contains high quality 3D prints of Halfling Ham Stuffingham, Left hand with turkey, and a 25mm round base. The 25mm base is standard for small characters, and the separate left hand with turkey lets you paint the arm and turkey separately for easier access.
Halfling Inquisitor Witch Hunter