The kit decides which painting advice applies
Most Desert Scorpions painting mistakes start before the first brush touches resin. The Desert Scorpions 10 Woman Squad is a mixed-material kit: hand-cast resin torsos and legs, plus 3D-printed modular parts such as the Female Sgt Sprue, Commando Backpacks, Rolled Sleeve Rifle Arms, and Special Weapons Sprue. That mix changes how you should prime, assemble, and paint the squad.
The kit also includes 10x 25mm round plastic slotta bases, so basing is part of the paint plan from the start. The supplied information does not include preparation or operating instructions, so the advice below is general modeling practice, not a manufacturer procedure.
What the squad actually contains
- Desert Scorpions 10 Woman Squad: 6x Desert Torsos with Heads 'A' Female and 6x Desert Torsos with Heads 'B' Female Twelve torso-and-head combinations for ten standing female legs means you will make choices before painting; decide head variants and poses first so your painting plan matches the models you build.

Desert Scorpions 10 Woman Squad - Desert Scorpions 10 Woman Squad: 10x Desert Legs Standing female, 10x Round Canteens, 10x Curved Daggers, and 10x Commando Backpacks (3D print) The repeated gear is a painting opportunity: canteens, daggers, and backpacks can carry squad-level color coding, but only if you plan those colors before assembly.
- Desert Scorpions 10 Woman Squad: 5x Female Universal Rolled Sleeve Rifle Arms (3D print) and 12x Rolled Sleeve Rifle Arms female (3D print) Seventeen rifle arms for ten figures gives you spares and pose options; painting arms separately from torsos is easier when you know how many you are actually using.
- Desert Scorpions 10 Woman Squad: 1x Female Sgt Sprue (3D print) and 1x Special Weapons Sprue (3D print) The sergeant and special weapon are focal points; give them distinct but consistent treatment rather than painting them as an afterthought.
Mistakes that come from ignoring the kit's mixed materials
- Mistake: priming everything as if it were one material: The kit combines hand-cast resin and 3D-printed modular parts. The supplied information does not specify a primer or a preparation routine, so test your primer on a spare resin piece and a spare printed piece before committing to the whole squad.
- Mistake: gluing every arm and backpack before painting: With 17 rifle arms and 10 backpacks in the kit, you have spares. Painting arms, backpacks, and torsos separately can keep detail accessible; the supplied information does not confirm a required assembly order, so choose the order that lets you reach the surfaces you want to paint.
- Mistake: treating the 25mm slotta bases as an afterthought: The kit includes 10x 25mm round plastic slotta bases. Decide whether you will paint the bases separately or attach the finished figures first, because that choice affects how you handle the legs and feet.
Desert camo claims that need a reality check
Desert camo painting tips often assume a single cloth color across the squad, but this kit gives you two female torso-and-head variants and repeated gear. A practical approach is to pick a limited palette for cloth, then use canteens, daggers, and backpacks to add small contrasting accents. The supplied information does not include a color scheme or camouflage pattern, so any specific desert palette is your choice, not a kit requirement.
One claim worth questioning is that extra bits are only for conversions. The kit description says it is packed with extra bits to customize your troops, and the parts count supports that: 10 canteens, 10 daggers, 10 backpacks, and more rifle arms than figures. Painting those extras consistently can make the squad look deliberate rather than random.
A squad painting workflow that fits this kit
- 1. Decide your ten builds first: Choose which torso-and-head variants, arms, and gear go on each of the ten standing female legs. The kit has 12 torsos with heads for 10 legs, so two will be spare or used as conversion bits.
- 2. Keep the sergeant and special weapon identifiable: The Female Sgt Sprue and Special Weapons Sprue are single sprues; plan a small visual cue for those figures before you paint the rank and file.
- 3. Test primer on spares: Use a spare resin piece and a spare 3D-printed piece to check that your primer gives the surface you expect. The supplied information does not confirm a specific primer, so this is a test, not a kit instruction.
- 4. Paint in subassemblies where it helps: Torsos, arms, backpacks, and bases can be painted separately if that gives you better access. There is no supplied instruction requiring full assembly before painting.
- 5. Unify the squad at the end: After the individual pieces are painted, bring the squad together with a shared accent color on canteens or daggers, then attach the figures to the 25mm slotta bases.
Where the evidence stops
The supplied record does not include preparation steps, primer recommendations, paint compatibility, or a confirmed assembly sequence. It also does not state that the resin and 3D-printed parts require different treatments. Treat any claim that you must wash, sand, or prime in a specific way as unconfirmed for this kit unless you find it in the manufacturer's own documentation.
What the record does support is the part count and the mixed materials. Those facts are enough to justify planning your builds and testing your materials before painting ten figures, without inventing rules the kit does not state.


